Network configuration help for PMP 450 SM/AP

[Cambium_Lena]

Hello,
The following are a few community posting regarding the VLAN configuration for PMP450.

How to configure PMP450 VLAN tagging

By default, PMP450 operates in transparent mode. that means that traffic tagged or untagged, will be passed through the radio links. To enable PMP450 to perform VLAN tagging, you need to first log on to the PMP450 AP to enable VLAN. It doesn't matter what configuration you put on the SM. IF the VLAN is NOT enabled on the PMP450 AP, then the radio links will operate in transparent state. Here's the steps to enable VLAN tagging: 1. Enable VLAN on the AP 2. Configure the SM Default VID to anyht…

MANAGEMENT VLAN

Here is some additional information regarding VLAN configuration on the PMP450 series. http://community.cambiumnetworks.com/t5/PMP-Getting-Started/VLAN-Engineering-and-Design/m-p/39292/highlight/true#M46 http://community.cambiumnetworks.com/t5/PMP-Best-Practices-and-Examples/How-to-configure-PMP450-VLAN-tagging/m-p/51009/highlight/true#M19 PMP 450 VLAN Tagging.pdf (667 KB)