If you want login each SM with single web user account via RADIUS, that is possible.
However to do that you have to make some config change like
- Set Auth type as 'Remote Then Local'
- Enable Fallback to local login [failsafe but not mandatory]
To avoid configuring this on each and every SM you can use zero-touch approach.You need a DHCP server and a TFTP server.Pack the above configuration in a config file and place in FTP/TFTP server path
When the ICC SM is registered to AP, once it is registered, SM enables DHCP and gets option 66 [configure this in your DHCP server to point to TFTP URL of configuration file]
- SM receives this URL and applies the configuration
So now next time you can login with that single RADIUS account.
If you use cnMaestro server,you can avoid DHCP and TFTP. Once your SM is onboarded with cnMaestro cloud this config template will be pushed to SM.
On this page
Check Configure Device section , and apply the template.
One more way is to configure using SNMP, check the corresponding OID in MIB file.