Replacing dead v5000

[vaa100 (Vasanth Ammaiappan)]

Hello @Matt00,

The below community page will help on the same.

Recovering the Onboard E2E Network from a Failed/Unrecoverable PoP Node

This article explains how we can recover the network from an available backup when the PoP Node crashed/failed/unrecoverable. NOTE: This feature is applicable only if the available backup was taken from a network with a PoP Node running 1.2.2 Software image version or higher. What is not recommended? “Replace Node” cnMaestro function that is shown in the screenshot below should NOT be used for this type of use-case [image] Note: Although, since an Onboard E2E can support Multi-POP, the “…

Thanks..